Koso D80 TNT-05 Speedometer / Rev counter km/h, MPH ABE silver ring

Koso D80 TNT-05 Speedometer / Tachometer km/h, MPH – ABE, Silver Ring

The Koso D80 TNT-05 speedometer/tachometer with silver ring provides precise vehicle data monitoring in a durable design. With ABE approval, it clearly displays speed, RPM, temperature, voltage, and other key values.

Main Features & Functions

• Speedometer: 0 ~ 360 km/h (0 ~ 225 MPH), switchable, unit 1 km/h (MPH)

• Speed warning: Adjustable 30 ~ 360 km/h (19 ~ 225 MPH), warning light when exceeded

• Maximum speed: 0 ~ 360 km/h (MPH)

• Odometer: 0 ~ 999,999 km (miles), unit 1 km (mile)

• Trip meter A/B: 0 ~ 9,999.9 km (miles), unit 0.1 km (mile)

• Oil change interval: Off / 500 ~ 16,000 km (300 ~ 10,000 miles), unit 100 km (miles)

• Fuel gauge: Resistance 100, 250, 270, 510, 1200, SW, user; 6-bar display

• Gear indicator: –, N, 1–6

• Shift recommendation: Display –, N, 1–6 when exceeding RPM threshold

• Shift light: Adjustable 1,000 ~ 10,000 RPM

• Digital tachometer: 0 ~ 8,000 RPM, unit 100 RPM

• Thermometer: Switchable °C / °F

• Water thermometer: -30 ~ 225 °C (-22 ~ 437 °F), unit 1 °C (°F)

• Voltmeter: 8.0 ~ 18.0 V

• Clock: 12- or 24-hour format

• Warning types: Light (L), slow flash (S), fast flash (F)

• Low voltage indicator: Adjustable 8.0 ~ 18.0 V, unit 0.1 V

• Backlight brightness: 1/5 (dark) ~ 5/5 (bright), 20 % steps

• Backlight colors: Purple, Red, Yellow, Green, Blue, Light Blue, White

• Warning lights: RPM warning, Warning light 1, Warning light 2, Neutral, Turn signal, High beam, Engine check

Technical Data

• Operating voltage: DC 12V

• Standard: JIS D 0203

• Dimensions: 94.7 × 94.7 × 69.2 mm

• Weight: ±165 g

• Rear housing diameter: approx. 80 mm

• Ring diameter: approx. 90 mm

• ABE/KBA: 91397

Package Contents

• LCD meter – 1×

• Main wiring harness – 1×

• Active RPM sensor – 1×

• RPM cable Type A – 1×

• RPM cable Type B – 1×

• Sensor wiring set – 1×

• Temperature sensor – 1×

• Bracket RPM sensor M8 / S-Type – 1×

• Bracket RPM sensor M10 / S-Type – 1×

• Hex bolt M5 × 5 P0.8 – 2×

• 2.5 mm hex wrench – 1×

• Meter bracket – 1×

• M5 washer – 2×

• Allen screw M5 × 16L – 1×

• Rubber strip – 1×

• Handlebar clamp – 1×

• Allen screw M8 × 20L – 1×

• M8 washer – 1×

• M8 nut × P1.25 – 1×

• Rubber cover – 2×