
To enter the setting mode, Koso meters must be set to the odometer. If any other function is set, you must press the ADJUST and SELECT buttons together for 3 to 5 seconds to enter the setting mode.
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
some text
To enter the setting mode, Koso meters must be set to the odometer. If any other function is set, you must press the ADJUST and SELECT buttons together for 3 to 5 seconds to enter the setting mode.
1- Find the metal tab
2- Slide the battery between the bottom and the tab
CAUTION: Make sure that the tab is ABOVE the battery.
The connection cannot be made if the tab is under the battery.
3 - Close the lid
When inserting the battery, make sure that the tabs near the close/open switch (battery +) are above the battery and the other tabs (battery -) are below the battery, as shown in the following figures:
All our meters are waterproof. The IP protection rating is 66.
The IP code, the international protection marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and evaluates the degree of protection against ingress (body parts such as hands and fingers), dust, accidental contact and water by mechanical enclosures and electrical enclosures. It is published by the International Electrotechnical Commission (IEC).
All our products are "universal", which means that they fit almost every application on the market, except for those that use the CANBUS system.
How to determine if your motorcycle uses the CANBUS system? Unplug your OEM meter and try to start your motorcycle.
Each Koso gauge comes with the brackets, cables and sensors you need for installation. In order to properly install our gauges, you will need the wiring diagram of your application so that you can match our cables with your wiring harness. If you want to know how to wire our gauges, check our website, there are instructions for each gauge so you know in advance how to prepare.